Dual Power Supply Adapter 5V 12A 12V 5A Switching Variable DC Power Supply AIA-1 manufacturer from China Shenzhen TOKPOWER Electronic Technology Co., Limited

Dual Power Supply Adapter 5V 12A 12V 5A Switching Variable DC Power Supply

Place of Origin:

Guangdong, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: AIA-1

Dual Power Supply Adapter 5V 12A 12V 5A Switching Variable DC Power Supply

<st

Dual Power Supply Adapter 5V 12A 12V 5A Switching Variable DC Power Supply

Application

1.Office lighting, artwork lighting, display case

2.Home lighting hotel, restaurant light and so on.

3.Commercial lighting such as: led ceiling light, down light, digital tube point sources,

panel light, spotlight,wall washer,strip light.

4.other public lighting

Specification


Output	DC Voltage	5V	12V	15V	24V
	Rated Current	50A	20A	15A	10A
	Current Range	0~50A	0~20A	0~15A	0~10A
	Rated Power	250W	250W	250W	250W
	Ripple & Noise (max.) Note.2	100mVp-p	100mVp-p	120mVp-p	120mVp-p
	Voltage Adj. Range	4.75~5.5V	10.8~13.2V	13.5~16.5V	21.6~26.4V
	Voltage Tolerance Note.3	±2.0%	±1.0%	±1.0%	±1.0%
	Line Regulation	±0.5%	±0.5%	±0.5%	±0.5%
	Load Regulation	±1.0%	±0.5%	±0.5%	±0.5%
	Setup,Rise time	200ms 100ms
	Hold time (Typ.)	30ms
Input	Voltage Range	85 ~ 264VAC 120 ~ 370VDC
	Frequency Range	47~63HZ
	Efficiency(Typ.)	70%	76%	77%	79%
	AC Current(Typ.)	0.5A/115VAC 0.25A/230VAC
	Inrush Current (Typ.)	COLD START 15A/115VAC 30A/230VAC
	Leakage Current	<0.5mA / 240VAC
Protection	Over Load	105 ~ 150% rated output power
Protection	Over Load	Protection type : Hiccup mode, recovers automatically after fault condition is removed
Environment	Working Temperature	-10 ~ +60°c (Refer to "Derating Curve" )
	Working Humidity	20~90% RH Non-condensing
	Storage temp.& humidity	-20~+85°C, 10~95%RH
	Temp. coefficient	±0.03%/°C (0~50°C)
	Vibration	10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
Safety & EMC (Note 4.)	Safety Standards	UL1012, UL60950-1, TUV EN60950-1, CCC GB4943 approved
	Withstand Voltage	I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
	Isolation Resistance	I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/ 25°c / 70% RH
	EMC Emission	Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
	EMC Immunity	Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A
Others	MTBF	522.1K hrs min. MIL-HDBK-217F (25 °c)
	Dimension	19911050mm (LWH)
	Packing	0.82Kg; 20pcs/16.4Kg
Note	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°c of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation.